Devilbiss FinishLine FLG-5 General Purpose Gravity Solvents Spray Paint Gun 1.4mm Tip 9.8cfm Air Consumption Trans-Tech Atomisation Technology + Pressure Regulator

Price: £131.95
(as of Feb 13,2022 23:22:31 UTC – Details)

The FLG-G5 Gravity-feed Spray gun is fitted with a 1.4mm nozzle for topcoat applications. and is supplied with a none Devilbiss Air Pressure Regulator
The FLG-G5 Spray gun is approved to ATEX regulations 94/9/EC, protection level; II 2 G X. Suitable for use in Zones 1 and 2

The FLG-G5 spray guns are not suitable for use with waterborne materials. The design uses EPA compliant atomising (Devilbiss Trans-Tech) technology to reduce overspray and improve coating efficiency. Nozzles and needles are manufactured in stainless steel. These guns are not designed for use with highly corrosive and/or abrasive materials and if used with such materials it must be expected that the need for cleaning and/or replacement of parts will be increased. If there is any doubt regarding the suitability of a specific material contact our MDA Bitec customer services.

Specifications:

Air supply connection – Universal ¼” BSP and NPS
Maximum static air inlet pressure – P1 = 12 bar (175 psi)
Nominal gun inlet pressure with gun triggered – 2.4 bar (35 psi)
Maximum service temperature – 40°C
Gun weight – 642 g
Air flow – 277 l/min (9.8 cfm)

Materials of Construction:

Gun body – Aluminium
Nozzle – Stainless steel
Needle – Stainless steel
Cup – Plastic
Also supplied with a Precision Air Pressure Regulator
This precision air pressure regulator is designed for use with lacquer guns and other pneumatic tools. The difference between an ordinary regulator and this regulator lies in the fact that this regulator never exceeds a preset value , even with rapid air strike, as happens with normal regulators.

Specifications:

Connections:

1/4″ Male Thread
1/4″ Female ThreadNominal Pressure: 0-8 bar
Maximum Pressure: 10.3 bar

Included:

Reducer
Manometer
Air Consumption (lit/Min) – 277 (9.8 cfm) @ 2.0 bar
Air Inlet Thread – 1/4″ Universal
Weight (gun & cup) – Gravity 642 gms, Suction 934 gms
Air Cap & Ring – Plated Brass, Cup capacity – Gravity 560 mls + Pressure Gauge