KZYEE KM10 Power Circuit Probe Kit, Automotive Circuit Tester with Auto Electrical System Testing Functions (Digital Voltage Tester/Multimeter/Short Finder

Price: £62.95
(as of Feb 20,2022 14:42:12 UTC – Details)

Product Description

The KZYEE KM10 Power Scan Kit is the most revolutionary circuit tester yet, operating at 12-24 volts. With voltmeter, test light, built-in flashlight, short circuit indicator, relay/component tester, continuity tester and ground fault indicator, the Power Scan is indeed the ultimate in performance and affordability, allowing users to check circuits in a single step.

What are the advantages of the product？

Detection of min/max voltage; Detecting short circuits without wasting fuses.

The 8-amp input is protected by a circuit breaker.

With a flip of the switch, you have an instant hot lead or ground lead.

Use the probe tip and ground lead simultaneously to power components right in the palm of your hand.

With the 20ft. extension cord, you can test bumper to bumper without jumper cables.

Instantly test components for continuity and identify positive, negative and open circuits without re-polarising the terminals.

FAQ

Q: Where can I find the probe tip?

A: We keep the probe above the back of the device. (Warm note: Be more careful when operating because of the sharp probe tip.)

Q: Why can not the probe tip itself stay engaged? It keeps falling out.

A: You need to push it a little harder until you hear a “CLICK” sound, then it will stay engaged.

Activating Components in Your Hand and The Vehicle

With a flip of the power switch, you have a hot instant/grounding for voltage & polarity testing. It powers up components such as windows, lights, starters, wipers, and so on. Simultaneously uses the hot lead and the ground wire to activate elements right in your hand.

KM10 Test Tool Specifications

DC voltage range: 0-65V +1digitResistance range: 0-100 kΩRating current: 1-10 AmpFrequency response of tone pass through 0Hz to 10Khz.Testing Standard:100% current: Hold > 1 hour150% current: trip in one hour200% current: trip in 3-30 seconds.300% current: trip in 0.5-4.0 seconds.

KM10 Electrical System Tester Continuity Testing Signal Circuit Testing Trailer Lights Testing Voltage & Polarity Testing Short Circuits Locating Bad Ground Contacts Checking Audible Monitoring of Electrical Signals

Can do more than a multimeter

Simply select the diagnostic mode by pressing the mode button, then touch the probe tip to a circuit. The LCD will display the DC /AV voltage, resistance.

Short-circuit locator, ground-fault checker

KM10 tracks and locates shorts without having to move panels, trim or carpet to expose wires. Do not waste any more fuses.

No additional battery required

Two power sources. Plug the KM10 directly into the cigarette lighter or battery electrode and you are ready to go.

Test Voltage
12-24V 12-24V Battey Capacity-2800mAh Battey Capacity-450mAh

AC,DC, Diod, Resistance Testing

✓

✓
5.5mm Camera with 1080P Resolution 5.5mm Camera with 1080P Resolution

Activating Components

✓

✓
Comes with 4.3-inch IPS Screen For Home Inspection, HVAC Inspection

Fuel Injector Mode

✓
3X Digital Zoom For Auto Repair, Wall Circuit Detection

Frequency，Duty Cycle Testing

✓
Snapshot, Video Recording For Drain Pipeline Repair

Waveform Display

✓
360⁰ Rotation For Industrial Applications

Buzzer Switchable

✓
Adjustable Brightness Works for iPhone, iPad, Android 4.2+ Phone/ Tablet

Extension Cable
20FT Semi-Rigid Cable Works Via WiFi from Endoscope WiFi hotspot box

Allows accurate diagnosis of DC Voltage, AC Voltage, Resistance and Diode of 12v-24v electrical systems by simply pressing the mode button.
With the ability to power components such as radiator fans, starter motors, relays, window regulators, windshield wipers, etc. Powered by the car battery or cigarette lighter, no extra battery or cable required.
The 20 foot extension cord will get you anywhere in your vehicles, trucks and trailers (12V-24V). Plus, the built-in flashlight is bright enough to illuminate your work area.
Knows how to immediately check for bad ground contacts and quickly track down shorts without losing fuses. Also, the unit is protected by a circuit breaker, which is a safe measure to protect the unit and your components from overload.