Power Meter Dual Tariffs Rechargeable, Maxcio Electricity Usage Monitor UK Plug for Costs Voltage Amps Watt KWH, Large LCD Display Energy Monitor Consumption Analyzer for Home Appliances, No Backlight

Price: £17.99
(as of Jan 29,2022 10:33:08 UTC – Details)

Product Description

Bring You A Simple Life

Maxio strives bring customers a simple and comfortable life.

Use this energy monitor in your home, office, to get more clear data about the consumption, assist you use the appliances more reasonable, economic.

230V~50HZ 16A/3680W 0~40℃

Maxcio Dual Tariff Power Energy Monitor

More Accurate Calculation of Electricity Consumption Per Cycle.

Dual Tariff Power Monitor

You can choose either single tariff or dual tariffs on the power meter. More accurate calculation of electricity consumption per cycle.

Multi-functional Socket

Monitoring equipment power (W), the total power consumption (KWH), accumulative total electricity cost (COST), emissions of carbon dioxide (KgCO2), voltage (V), current (A), power factor, AC frequency (Hz) and the power consumption history, very suitable for for energy monitoring in electrical appliances.

Multiple monitoring parameters Overload Warning Backup Battery Large LCD Screen

Large LCD Display

The energy monitor is built with a large digital display screen which can be seen from far away and is very easy to read in good light.

Energy & Money Saving

Using this energy meter to real-time monitor the power consumption of electrical device, to get more clear data about usage, and help save energy and money.

Overload Warning

Once the load exceeds the power value you’ve set or 3680W, there will be a flashing “OVERLOAD” icon on the screen, so you will know which appliance is high energy consumption.

How to set the SINGLE TARIFF (TARIFF 1)

1.Press button “COST/-” until “TARIFF 1” appears.

2. Long press button “SET/OK” until “TARIFF 1” flashes.

3. Press button “ENERGY/+” or “COST/-” to chose TARIFF 1, then press button “SET/OK” to start unit setting.

4. Press the “HISTORY” button to switch to the location of the desired value of rate.

5. Press the “ENERGY/+” or “COST/-“button to adjust the value of the rate.

6. Finally, press button “SET/OK” to end the rate setting and start running the program.

How to set the DUAL TARIFF (TARIFF 1 & TARIFF 2)

1.Press button “COST/-” until “TARIFF 1” appears.

2.Long press button “SET/OK” until “TARIFF 1” flashes.

3.Press the “HISTORY” button to start setting the unit of TARIFF 1.

1). Press the “ENERGY/+” or “COST/-“button to adjust the value of the rate.

2). Press the “HISTORY” button to switch to the position of the rate value that needs to be set.

3). Press button “SET/OK” to end TARIFF 1 rate unit setting and enter the setting of start time.

4). Press the “ENERGY/+” or “COST/-“button to adjust the value of the start monitoring time.

5). Press the “HISTORY” button to switch to the position of the time value that needs to be set.

6). Press button “SET/OK” again to enter the setting of “TARIFF 2”, then please repeat the operation of 1) /2) /3) /4) /5).

4. Finally, press button “SET/OK” to end the setup and start running the corresponding program.

✔️Upgrade Version✔️ – Maxcio’s newly launched rechargeable power meter. It can be automatically charged after being plugged into the power source, without worry about the problem of power exhaustion caused by non-rechargeable batteries. Even if there is a sudden power failure, there is no need to worry about the loss of measured data. The power of the rechargeable battery can be maintained for 40 days (on the premise of not operating the device).
✔️Real-Time Monitoring & Data Analysis✔️ – Monitor the real-time power consumption, current and electricity cost of your electrical equipment. Save money and energy by analyzing days/ weeks/months consumption data.
✔️Muti-Measurement Functions✔️ – This power energy meter can measure and display power (w), Energy (kWh), Current (A), Voltage (V), Frequency (Hz), CO2 emissions (KgCO2), Power Factor, Cost, Max Power, etc. You can freely combine multiple detection modes. Very suitable for monitoring of energy in the electrical appliances.
✔️Overload Alarm✔️ – When the power exceeds the set value or the maximum power value (3120W), the “OVERLOAD” icon will flash on the large LCD screen, Very helpful for reducing power consumption and ensuring security.